Essentials

These baseplates are the foundation that keeps Chris King headsets turning with legendary smoothness. Manufactured from high-quality stainless steel or titanium, Chris King makes replacement baseplates for all standard sizes and a number of ingenious solutions for those that need something a little special to make their headset work. - Engineered and manufactured in Portland, Oregon USA - High-quality stainless steel and titanium baseplates available for all standard Chris King headset sizes - Titanium baseplates are available in 1-inch and 1 1/8-inch sizes only - Devolution baseplates are a stainless steel solution that allow King headsets to adapt to a wide variety of steerer tube sizes - King Stainless Steel baseplates are available in undersized and oversized versions for irregular steerer tube sizes - 30.0mm ID/40.5mm OD for post-April 1995 1-1/8" Headsets - 30.0mm ID/44.0mm OD for pre- April 1995 1-1/8" Headsets

All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm. SYSTEM COMPATIBILITY - Lumina Series - MiNewt Cordless Series - Mako Series WARRANTY - This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)

The TL 5.0 SL has five ultra bright LED’s with four different operating modes, including three different flash modes. New for 2015, the amber Side Lights help to provide even more visibility from the sides of the rider. The TL 5.0 SL will help keep you safe and seen from behind (180 degree visibility). The TL 5.0 SL operates on 2 AAA batteries (included) for up to 100 hours on flash. - 5 Ultra Bright LEDs - A wearable safety light – clip onto various straps, belt loops, etc. - 100 hours run time - Budget-friendly quality light - Eye catching flash mode patterns - 4 operating modes - Runs on AAA batteries - FL 1 Standard IP64, water resistant WARRANTY The TL 5.0 SL is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light - Seatpost Mount - 2 AAA Batteries

The NiteRider Lumina 1000 Boost is the perfect light for mountain bikers, road riders, adventure riders and urban commuters. Featuring a tried and true handlebar mount (fits up to 35mm) that is sure to remain rock solid whether on the trail or pavement. Double clicking the power button activates Boost Mode, giving you the option to operate your light at 1000 lumens maximum light output! This self-contained light makes use of the IntelliCharge function, which charges the battery twice as fast as the normal charge rate when connected to a higher amp AC adapter. With the new NiteRider custom engineered collimator lens, the Lumina 1000 Boost projects a wide and even beam pattern of 1000 lumens! - All New Collimator Lens, produces a generous even widespread beam - Boost Mode, double click power button to unleash maximum LED output - 5 Light Levels plus 2 Daylight Flash Modes - CREE LED at 6000k - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable handlebar mount - Fits standard and oversize 35mm handlebars - Perfect for helmet mounting (Helmet Mount sold separately) - IntelliCharge – Reduce charge time in half! - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. WARRANTY The Lumina 1000 Boost is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Handlebar Mount fits up to 35mm - USB Charging Cable

Less Is More. Now you can ride with the feeling like you are not wearing gloves yet take comfort knowing you are covered. - Embossed back panel cuff for simplistic comfort and modern look - Ultra-lightweight 4-way stretch woven with laser perforations for breathability - Perforated single-layer cool skin palm - Mesh finger gussets for increased airflow - Reflective top hand art for added visibility - Integrated tech thread keeps you connected with your devices

Our best-selling mountain bike gloves with touch screen compatibility The Ranger Gloves are known for offering performance and quality that is typically only found in much more expensive gloves. A yearly best-seller, this versatile mountain bike glove works well in almost any discipline. The Ranger Glove continues to set the standard for performance, fit and value in an affordable and great looking MTB glove. - Compression molded cuff for secure fit - Absorbent micro-suede thumb - TruGel strategically placed gel palm protection - Conductive threads at index finger and thumb for touch screen compatibility - Screen print artwork - Hook and loop wrist closure style

Big things come in small packages and the NiteRider Lumina Micro 650 is the proof. The Lumina Micro 650 delivers a powerful punch with 650 lumens of light output, helping you to safely navigate your ride. The NiteRider Sabre 110 is a super bright, lightweight USB rechargeable LED tail light. It utilizes a multi LED array designed for eye-catching visibility both day and night. Lumina Micro 650 Features - Lumen Output: 650 - 5 Modes with Run Times: 1:30 – 20:00hrs - Charge Time: 1:45 / 3:30hrs - Weight: 130g - Battery: Li-Ion - Low Battery Indicator - Compact and Lightweight - Water / Dust Resistant IP64 Rated Lumina Micro 650 Run Times - Low—7:00h at 150 Lumens - Med—3:00h at 350 Lumens - High—1:30h at 650 Lumens - Flash—6:30h at 650 Lumens - Walk—20:00h at 50 Lumens Sabre Features - Lumen Output: 110 - 6 Modes with Run Times: 2:00 – 60:00hrs - Charge Time: 2:30hrs - Weight: 28g - Battery: Li-Po - Low Battery Indicator - 110 Lumen Super Lightweight Daylight Visible taillight Sabre Run Times - Pulse Flash—7:00h - Flash—6:00h - Fast Flash—17:00h - Steady High—1:45h - Steady Med—4:00h - Steady Low—8:30h

Looking for our best selling Lumina series in a smaller and lighter package? Look no further than our Micro 900. NiteRider makes this headlight USB rechargeable for convenient on-the-go charging. Another feature of note on the 900, Intellicharge, which reduces your charge time in half—giving you more time riding and less time waiting. Its light weight at 130 grams makes it quite suitable as a helmet mountable option as well as bar compatible—standard and oversized 35mm diameters. - 900 lumen output - All New Collimator Lens, produces a generous even widespread beam - 4 Light Levels plus 1 Daylight Flash Mode - FL1 Standard IP64, dust and water-resistant - High output light using a CREE LED at 6000k - Ultra lightweight 900 lumen head light, weighing in at only 130g including mount - Secure on and off-road handlebar mount - Fits standard and oversize 35mm handlebars - Small compact design that’s perfect for helmet mounting (Helmet Mount Sold Separately) - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 8-10 seconds to lock out operation of light. USB RECHARGEABLE The Lumina Micro 900 is USB Rechargeable. Another feature of note on the 900, Intellicharge, which reduces your charge time in half—giving you more time riding and less time waiting. Charge time is 2:30 hours, when plugged into a power source outputting over 500 mA and 4:30 hours when below 500 mA. MOUNTING OPTIONS Its compact profile and high light output make the Lumina Micro 900 ideal for helmet mounted applications, helmet mount available as an optional accessory. Or use handheld in Walk Mode for an amazing 60:00 hours run time. WHAT'S INCLUDED? - LED Light Head - Internal Li-Ion Battery - Handlebar Mount fit up to 35mm - USB Charging Cable

A QUICK-CHANGE DIRECT MOUNT CHAINRING SYSTEM Switch was developed to reduce the cost of replacement chainrings, increase compatibility with new offsets and to make the process of changing your chainring much faster and simpler. - Cheaper Replacement Cost - Replacement rings are a fraction of the cost of a complete direct mount chainring - Quick Change - Replace your ring in less than an minute, using only a 4mm hex key. Tailor your gearing to the terrain that you're riding - Enduro World Series Champion Winning Narrow Wide tooth profile keeps your chain in place on the roughest terrain - 4 Ring Sizes (28, 30, 32, 34T) - 2 Profiles - both Round and Oval - 12 speed ring designed to work with all 10, 11, and both Shimano Hypergilde+ 12 and SRAM Eagle 12 speed chains. - Get ultimate traction with Oval rings by smoothing out the torque you deliver to your rear tire SPECS - Material: 7075-T6 Aluminum Oval Rings: - 12% ovality (32T is equal to a 30T-34T range) - 115° clocking from crank arm puts the major axis in your power stroke - Compatibility: All Switch Carriers; 10, 11 and 12 Speed Chains

The EDC Cap Kit includes the worlds lightest headset top cap (4.2g), and an EDC steerer plug with drain hole which keeps crud out of your steerer. Top caps are compatible with all 1-1/8" aluminum steerer tubes. The EDC steerer plug is required for EDC tool storage and is compatible with most aluminum tapered steerer tubes. KIT INCLUDES - EDC TOP CAP - EDC steerer plug - 2x 1mm, 3mm, & 5mm Headset Spacers

Dry & Light Weight Mother Nature has met her match with this low-profile glove engineered to keep you going fast in cold, wet weather. Laminated insulated shell with waterproof breathable insert blocks out the water and keeps them dry while maintaining exceptional dexterity and control of your bike. - Single-layer PU palm for weather protection - Laminated mock-mesh top of hand fabric - Waterproof-breathable insert secured to outer layer for optimal gripping - Silicone-printed palm graphic increases grip in wet conditions - Reflective graphic on top of hand offer a clean look with improved visibility - Extended waterproof neoprene pull-on cuff for more coverage - Conductive index finger & thumb keeps you connected with your digital device - 88% Polyester, 10% Polyurethane, 2% Elastane

- Integrated grip body and locking collars for ultimate durability - 6082 T6 aluminum CNC machined collars - Diamond knurl pattern - Smooth profile end transition, for maximum comfort - Snap-fit end caps - Made in the UK

The Flex Suit offers customisable shoulder protection with the option to carry a water bladder in place of the spine protector. All the pockets you need on the trails in easy access positions and a compression fit that can be worn under a jersey. 

Trail and XC Head and Brain Protection Five steps up from your standard trail helmet! A lightweight all-purpose MTB helmet for trail riding, cross country training and back country or gravel adventures. This helmet is well ventilated with maxiflow air channels and the Dri-Lex liner is washable, moisture wicking, anti-odor and breathable. What is most important about the Leatt MTB 2.0 helmet is the head and brain protection level it offers. Featuring 360 Turbine Technology, the helmet is lined with turbines which are 360 °moving discs constructed from an energy-absorbing foam and material. This tech has two exclusive advantages, namely the reduction of rotational acceleration to the head and brain and the absorption of energy upon impact at concussion level. Be comfortable and ride safe. - Lightweight Polymer Compound shell in three sizes - MaxiFlow impact foam air channels effective even at low speed - 360°° Turbine Technology - Reduced peak brain acceleration by up to 30% at impact speeds associated with concussion - Reduces peak brain rotational acceleration by up to 40% - In-molded impact foam for great energy absorption - Maximized ventilation with 20 vents - Visor with breakaway function for rotational impact force reduction - Dri-Lex moisture wicking, breathable, anti-odor and washable inner liner - Certified and tested: AS/NZS 2063:2008, EN1078, CPSC 1203 - Weight: from 300g (0.65 lbs) - Plastic Free Recyclable Packaging - Sizing #S (51-55cm –20-21 5/8") #M (55-59cm –21 5/8-23 1/4") #L (59-63cm –23 1/4-24 3/4")

absoluteBLACK Oval Direct Mount 1x Chainrings for CINCH greatly improve traction and climbing abilities. They are designed for Race Face cranks that utilize the CINCH system. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio - 6mm offset for standard 49mm chainline

absoluteBLACK Oval Direct Mount 1x Chainrings for SRAM greatly improve traction and climbing abilities. They are designed for SRAM cranks that have a 3-bolt direct mount interface and removable spider. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio - 6mm offset is designed for 135/142 spacing on standard DUB/GXP/Long-Spindle BB30, as well as 170/177 spacing on fat bike cranks

BASE LAYER CHAMOIS BIB A brand new premium Leatt performance base layer compatible with any LEATT shorts / pants. Made in Italy from a lightweight 4 way stretch moisture wicking material with an above the knee cut to allow for protectors. The 4.0 Bib Liner has a unique horizontal fly opening for when your desperately in need in the middle of the forest. They feature plenty of storage options. Mobile phone leg pockets with silicone grip to prevent the phone from sliding out when riding. 3 rear cargo pockets with silicone grippers and 1 cargo pocket for use with new Hydrapack Horizontal Bladder. Above the knee the bib liner has silicone leg grippers. Great performance and comfort for long rides. This product comes in plastic free recyclable packaging. MTB 4.0 bib Liner: - Base layer / compatible with any LEATT shorts / pants. - Lightweight 4 way stretch moisture wicking material - Above knee cut –to allow for protectors. - Unique Fly opening. - Mobile phone / storage leg pockets with silicone grip. -3 Rear cargo pockets with silicone gripper. -1 cargo pocket for use with new Hydrapack Horizontal Bladder - Silicone leg grippers - Stretch Stitch thread for seam strength - Plastic Free Recyclable Packaging - quad density "Performance" Chamois: - ECO X-Tract Moisture wicking fabric - Perineal and Ischiatic Quad density protection design - Great performance for maximum long ride comfort - Made in Italy

A high-performance glove without the high price tag. The Dirtpaw Gloves have armored knuckles, padded palms, and superior flex-point comfort to remain the top choice for the entry-level rider. The hook and loop closure provides a secure fit and built-in stretch gives you maximum dexterity. - Compression molded neoprene cuff for a secure fit - Padded, single layer Clarino palm - Stretch mesh finger gussets for mobility - Padded Knuckle provides trail-ready coverage - Silicone print at fingertips for lever grip - Touch screen compatible - Hook and loop wrist closure - 39% polyamide nylon / 22% polyurethane / 15% neoprene / 12% polyvinyl chloride / 12% polyester

Producing 850 brilliant lumens, the NiteRider Lumina Micro 850 is smaller, lighter, and more compact than the original Lumina series. Its compact profile and high light output make the Lumina Micro 850 ideal for helmet mounted applications (helmet mount available as an optional accessory). Using the included handlebar mount (fits up to 35mm) with quick release tab prevents any chance of theft by allowing convenient removal and installation of the head light. - All New Collimator Lens, produces a generous even widespread beam - 4 Light Levels plus 1 Daylight Flash Mode - FL1 Standard IP64, dust and water-resistant - High output light using a CREE LED at 6000k - Ultra lightweight 850 lumen head light, weighing in at only 130g including mount - Secure on and off-road handlebar mount - Fits standard and oversize 35mm handlebars - Small compact design that's perfect for helmet mounting (Helmet Mount Sold Separately) - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. WARRANTY - The Lumina Micro 850 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Handlebar Mount fits up to 35mm - USB Charging Cable

Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series

- A Threadless no tap install option that lets you store the EDC V2 Tool inside your stem/steerer tube without threading your steerer tube - The Threadless Carrier replaces your star nut and lets you preload your headset with a bolt, while also creating a space for the EDC Tool. - Easy to install in less than 10 minutes. - Compatible with EDC V2 Tool (You must use the small EDC V2 Storage Capsule with the Threadless Carrier.) The tire plug and bacon strips fit within the small storage capsule. - Chain pliers are not compatible with the threadless carrier set up. - The EDC Threadless Carrier is NOT compatible with V1 EDC Tools (Green Multi-Tool)

Dimples for the palm, waffle for the fingers. The Clutch grip combines traction and comfort. The waffle tread is specifically shaped to the fingers and oriented for traction in varied conditions. The diameter is narrow at 30mm with an extra wide format at 150mm overall. It features our special tacky compound based on 25a durometer. Weighing in at 100g /pair. Chromag grips feature our unique ‘Split-Teardrop’ end clamp which effectively covers the bar end while still utilizing a true pinch-clamp for the best purchase to the bar.