Other

Travel reduction clips for Cane Creek suspension forks. - Cane Creek Helm Air Travel Reduction Clips, Set of Two 10mm Clips

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 40mm (1-1/2") tapered steerer tubes - Lightweight aluminum construction

Cane Creek crown races are interchangeable between headset series.

Bearings for Cane Creek AER headsets. - Aluminum Bearing

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

Cane Creek Progressive Rate VALT coil springs are designed to provide riders with a true rise-in-rate spring curve. - Springs feature the progressiveness and ramp-up that hard-charging riders demand - Designed for use with Cane Creek Coil shocks - Progression begins at 50% into the stroke of the spring - Crafted from high-performance spring steel - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks

These baseplates are the foundation that keeps Chris King headsets turning with legendary smoothness. Manufactured from high-quality stainless steel or titanium, Chris King makes replacement baseplates for all standard sizes and a number of ingenious solutions for those that need something a little special to make their headset work. - Engineered and manufactured in Portland, Oregon USA - High-quality stainless steel and titanium baseplates available for all standard Chris King headset sizes - Titanium baseplates are available in 1-inch and 1 1/8-inch sizes only - Devolution baseplates are a stainless steel solution that allow King headsets to adapt to a wide variety of steerer tube sizes - King Stainless Steel baseplates are available in undersized and oversized versions for irregular steerer tube sizes - 30.0mm ID/40.5mm OD for post-April 1995 1-1/8" Headsets - 30.0mm ID/44.0mm OD for pre- April 1995 1-1/8" Headsets

Dropper remote optimized for drop bar gravel bikes. - Single mounting bolt for left-hand actuation - Two-way drop actuation for use in multiple hand positions - Compatible with Highline and other cable-actuated dropper seatposts - check with your seatpost manufacturer.

- Aluminum straddle cable carrier for cantilever brake

Dimension Seatpost Clamps - Diameters: 28.6mm, 30.0mm, 31.8mm, 35.0mm - Weight: 34g

Dimension Stem Column Adaptors - Total quill length 180mm - Measurement from minimum insertion to top of steerer adaptor is 118mm - Alloy - Quill insertion diameter: 1-inch

ABI Headset Bearing for new builds or replacements.

FSA bearings that set directly into the frame without the use of pressed in cups. - 36/45 degrees is Cane Creek-compatible - 45/45 degrees is Campagnolo-compatible

- Allows use of a 1-1/8" threadless stem in combination with a threaded 1" headset/steerer - 22.2 quill diameter - 50mm stem clamp area

-Seatpost clamp spacer kit for Advanced ISP models (2012-2014)

-1-1/4" headset spacer kit with following sizes: 2.5mm(x1) .5mm(x2) 10mm(x2)

- Disc rotor lockrings to securely mount Center Lock rotors - Available for standard or oversize QR or thru-axle hubs

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

- Compatible with Shimano HG40/50/70/90 chains - KMC Z50, Z7, Z8, X8.93, X8.99 chains - Reusable - No Tool Required - Pin Length: 7.3 mm

Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC and Shimano 10-speed chains - Includes 2 pairs

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

- 2Mm powertex neoprene that prevents nicks and scratches while reducing the noise of chain slap - Tightly stitched with heavy-Duty thread to add extra strength and durability - Jumbo: Taper (95Mm to 85mm and is 254mm in length) - Standard: Taper (85Mm to 75mm and is 254mm in length) - Super jumbo: Taper (117Mm to 107mm and is 254mm in length) - Jumbo 29er: Taper (95 Mm to 85 mm and is 295 mm in length) - Swingarm: Taper (183Mm to 175mm and is 227mm in length)

Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes. - Includes hardware to mount adaptor to frame

Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes. - Includes hardware to mount adaptor to frame

- Upper cables for Odyssey's Gyro G3 (sold separately) - Universal fit. - Upper cables only.