Chainrings

Designed to fit Shimano 4-arm 96 Asymmetric BCD XT M8000, SLX M7000, or Deore M6000 1x or 2x cranksets. These rings feature Drop-Stop tooth profiles for mud clearance, chain retention and durability. - Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Made from 7075 Aluminum for long life - Use of a clutch-style rear derailleur is recommended

Designed for Race Face CINCH cranks with removable spiders. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - Not compatible with 9 speed chains - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Made from 7075-T6 aluminum for long life - Use of a clutch-style rear derailleur is recommended - Chainline is 52mm

Wolf Tooth's SDM chainrings replace your existing spider and chainring with one clean looking, light weight, and stiff piece of machined billet. These come in 3 different offsets: standard GXP, Boost and BB30. Compatibility: - These direct mount chainrings will replace your existing chainring and spider, which is attached via 3 bolts on the back side of the spider near the spindle. You will use these same 3 bolts to attach the Wolf Tooth SDM® chainring. There are 3 offsets: - Standard: 47mm chainline, 6mm offset for cyclocross and road cranks - Standard: 49mm chainline, 6mm offset for GXP and long spindle BB30 - Boost: 52mm chainline, 3mm offset - BB30: 49mm chainline, 0mm offset for BB30 short spindle cranks - Fat Bikes: If you are planning to use this on an X9 or XX1 fat bike crankset with a 190/197 rear hub spacing use the 0 offset ring. If your fat bike has a 170/177 rear hub spacing, use the Standard 6mm offset - If you have a BB30 crankset (30mm diameter Aluminum Spindle) this measurement will determine whether it is a long or short spindle:

The direct mount chainrings for SRAM cranksets replace your existing spider and chainring with one clean-looking, lightweight, and stiff piece of machined billet. Wolf Tooth patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability. More power? Check. Better traction? Definitely. Less shifting? Yup. Funky uneven pedal stroke? Not with Wolf Tooth PowerTrac Elliptical (PTE) chainrings. Our proprietary design means a slightly less ovalized ring (10%) with less aggressive timing (112 degree) than competitors versions; any change to your pedal stroke is unnoticeable for most riders, but they still provide the POWER and TRACTION benefits inherent to oval chainrings. Wolf Tooth patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability. Compatibility These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that the SRAM 12spd Red and Force AXS use a different 8-bolt mounting interface that is not compatible with these chainrings. Specifications: - Boost: 3mm offset for 52mm chainline - Mount type: Direct Mount for SRAM - Offset: Boost - Chain Compatibility: Drop-Stop A tooth profile for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains

Designed for Race Face CINCH cranks with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. - Elliptical chainring shape provides better efficiency in the recovery zone, as well as increased traction thanks to consistent torque - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Made from 7075-T6 aluminum for long life - Use of a clutch-style rear derailleur is recommended - 52mm chainline / 3mm offset for boost spacing

Designed for Easton CINCH cranks with removable spiders. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. - Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Drop-Stop FT is compatible with all 10-, 11-, and 12-speed chains (including SRAM Flattop 12-speed chains), with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Made from 7075-T6 aluminum for long life - Use of a clutch-style rear derailleur is recommended - 3mm offset provides optimal chainline (47mm) for CX and Road

- Fits asymmetrical 96mm BCD with built-in threaded standoffs - Used on Shimano XTR M9000 and M9020 crankset (both race and trail models) - Features Drop-Stop tooth design to prevent unwanted chain drop - Mount using the stock Shimano XTR M7 chainring bolts - 49mm chainline for 28-34 tooth and 50mm for 36 tooth - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Made in the USA from 7075-T6 aluminum alloy - 41g (30t)