Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Other
$6.50
Travel reduction clips for Cane Creek suspension forks.
- Cane Creek Helm Air Travel Reduction Clips, Set of Two 10mm Clips
$11.50
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 52mm lower headset bearings
- Compatible with 40mm (1-1/2") tapered steerer tubes
- Lightweight aluminum construction
$22.99
Cane Creek crown races are interchangeable between headset series.
$23.50 - $39.00
Bearings for Cane Creek AER headsets.
- Aluminum Bearing
$29.50
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
Cane Creek
Cane Creek Progressive Rate VALT Lightweight Rear Shock Spring - 55mm x 500-610lbs, White
$99.99
Cane Creek Progressive Rate VALT coil springs are designed to provide riders with a true rise-in-rate spring curve.
- Springs feature the progressiveness and ramp-up that hard-charging riders demand
- Designed for use with Cane Creek Coil shocks
- Progression begins at 50% into the stroke of the spring
- Crafted from high-performance spring steel
- Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks
$20.00 - $29.00
These baseplates are the foundation that keeps Chris King headsets turning with legendary smoothness. Manufactured from high-quality stainless steel or titanium, Chris King makes replacement baseplates for all standard sizes and a number of ingenious solutions for those that need something a little special to make their headset work.
- Engineered and manufactured in Portland, Oregon USA
- High-quality stainless steel and titanium baseplates available for all standard Chris King headset sizes
- Titanium baseplates are available in 1-inch and 1 1/8-inch sizes only
- Devolution baseplates are a stainless steel solution that allow King headsets to adapt to a wide variety of steerer tube sizes
- King Stainless Steel baseplates are available in undersized and oversized versions for irregular steerer tube sizes
- 30.0mm ID/40.5mm OD for post-April 1995 1-1/8" Headsets
- 30.0mm ID/44.0mm OD for pre- April 1995 1-1/8" Headsets
$49.99
Dropper remote optimized for drop bar gravel bikes.
- Single mounting bolt for left-hand actuation
- Two-way drop actuation for use in multiple hand positions
- Compatible with Highline and other cable-actuated dropper seatposts - check with your seatpost manufacturer.
$17.99
Dimension Seatpost Clamps
- Diameters: 28.6mm, 30.0mm, 31.8mm, 35.0mm
- Weight: 34g
$26.00
Dimension Stem Column Adaptors
- Total quill length 180mm
- Measurement from minimum insertion to top of steerer adaptor is 118mm
- Alloy
- Quill insertion diameter: 1-inch
$31.85
ABI Headset Bearing for new builds or replacements.
$24.00
FSA bearings that set directly into the frame without the use of pressed in cups.
- 36/45 degrees is Cane Creek-compatible
- 45/45 degrees is Campagnolo-compatible
$16.00
- Allows use of a 1-1/8" threadless stem in combination with a threaded 1" headset/steerer
- 22.2 quill diameter
- 50mm stem clamp area
$13.00
-Seatpost clamp spacer kit for Advanced ISP models (2012-2014)
$15.00
-1-1/4" headset spacer kit with following sizes: 2.5mm(x1) .5mm(x2) 10mm(x2)
$13.99
- Disc rotor lockrings to securely mount Center Lock rotors
- Available for standard or oversize QR or thru-axle hubs
$1.50
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension
- Uses standard chain pin connector and tool
$1.98 - $4.99
- Allows quick chain removal without tools
- MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~|
- MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~|
- MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~|
- MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~|
- MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~|
- MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~|
- MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
$3.99
- Compatible with Shimano HG40/50/70/90 chains
- KMC Z50, Z7, Z8, X8.93, X8.99 chains
- Reusable
- No Tool Required
- Pin Length: 7.3 mm
$4.99
Use to create your desired chain length in single-speed applications. Only one half link is needed.
- Non-reusable
- Width: 9.4 mm
- Drivetrain Speeds: 1
- Color: Black
- Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC
$5.50
- Missing links to make chain installation, maintenance and reparation easier
- Card of 2
$6.00
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs.
- Compatible with KMC and Shimano 10-speed chains
- Includes 2 pairs
$10.00 - $10.80
- Missing links to make chain installation, maintenance and reparation easier
- Card of 2
$5.99
Parts for the service of the seal and restore the smooth cycling of KS dropper posts.
$9.99
- 2Mm powertex neoprene that prevents nicks and scratches while reducing the noise of chain slap
- Tightly stitched with heavy-Duty thread to add extra strength and durability
- Jumbo: Taper (95Mm to 85mm and is 254mm in length)
- Standard: Taper (85Mm to 75mm and is 254mm in length)
- Super jumbo: Taper (117Mm to 107mm and is 254mm in length)
- Jumbo 29er: Taper (95 Mm to 85 mm and is 295 mm in length)
- Swingarm: Taper (183Mm to 175mm and is 227mm in length)
$14.00
Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes.
- Includes hardware to mount adaptor to frame
$14.00
Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes.
- Includes hardware to mount adaptor to frame
$7.99
- Upper cables for Odyssey's Gyro G3 (sold separately)
- Universal fit.
- Upper cables only.
Page 1 of 4
Next page