Wheels

The Muc-Off Tubeless Rim tape is made from their proprietary performance material with a pressure-sensitive adhesive to provide just the right amount stretch whilst maintaining durability and strength needed to create a lasting airtight seal. Semi-transparent material makes locating the valve hole easy.

The Problem Solvers Axle Nut is perfect for wheels with solid axles (also called bolt-on axles). This quality nut is made of durable chrome-plated steel and features a built-in integrated rotating washer to hold tight.

WTB's TCS Brass Valves are your key to the excellence that is tubeless wheels and tires. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch.

Thru-Axle Conversion kits for a variety of hubs.

Surly Ultra New Axle Kits are for upgrading the internals of your existing Surly New hubs or replacing the internals on your Surly Ultra New hubs. -Compatible with Surly New hubs (upgrade kit) and Surly Ultra New hubs (replacement kit) - Each kit contains an axle, two 6901 cartridge bearings, two aluminum dust shields, two stainless steel cones, two stainless steel 6x1mm bolts, and two stainless steel bolt washers - Axle is quick release and bolt-on compatible; bolts included, QR is NOT included - Standard Surly New hubs come stock with 7901 bearings; this kit uses 6901 bearings which are non-angular

Stan's lightweight aluminum valve stems are half the weight of Stan's standard brass valves. The secure round base is compatible with most tubeless rims and a perfect fit for all Stan's BST rims. A removable valve core makes adding sealant easy, and these babies fit up to 8mm valve hole. Sold as a pair.

Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually

- Alex MD21 double wall 26'', disc specific rim, Black - Shimano M475 hubs - For All-Mountain and Cross-Country - Tubeless Ready - Inner rim width: 21mm - Outer rim width: 26mm - Rim height: 18 mm - Rim weight: 450 g - With eyelets - Schrader Valve - 32 holes - Sapim Leader Stainless spokes—Black

Zipp's 101 XPLR is our first purpose-built rim for gravel. Thanks to MOTO Technology, this wheelset arms gravel cyclists with more control and durability over harsh terrain, providing a smooth ride quality that helps reduce fatigue. That means a more comfortable ride. The 101 XPLR -short for explore-is purpose-built for riders searching for adventure beyond the norm. Think of it as a magic carpet ride over primitive roads, especially with large tubeless tires at lower tire pressures. This rim is ideal for gravel racing, adventure, or any long day in the saddle. Based on Zipp's MOTO Technology, the 101 XPRL's single-wall rim construction provides excellent compliance and vibration damping. Less fatigue, allows you to ride longer and faster. Quarq's TireWiz is an add-on option for 101 XPRL to dial in your pressure for an even more compliant ride. - All day comfort and compliant ride - Available in 700c or 650b - 27mm wide internal profile - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Less fatigue, which allows you to ride longer and faster - Frustration-free tire installation - Lifetime Warranty

A sleeved AM rim, supporting modern tires with its 30mm inner width. Just wide enough, just light enough. With a 30mm internal rim width, the M 502 works for tires ranging from slightly wide to quite wide, allowing it to attack the hardest of terrains. DT Swiss's benchmark rim material is combined with an economic sleeve-junction to offer the best ratio between low weight, big width, and a low price.

- The Stumphouse is a bombproof MTB wheelset with a modern 30mm wide tubeless rim. - Stout lacing of 32 spokes front and rear means your only worry is making sure you have enough time to ride. - All Prologue series wheels are built on Skyuka hubs featuring 10-degree engagement and Abec 3 sealed cartridge bearings. - The Skyuka MTB rear hub is available with a Shimano Hyperglide, Microspline or Sram XDR freehub body and requires no tools to swap between the different freehub body standards. - Built with Pillar TB2018 round double butted spokes and external brass nipples, the Stumphouse is a great budget upgrade that can be used for everyday trail riding.

Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.

Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims).

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

Maximum stiffness and highest safety—the RWS Quick Release for road and MTB. Our patented RWS axle system is stiffer, safer, and easier to use than conventional quick-release axles. The RWS quick release is absolutely reliable and offers a strong connection to the frame. The perfect choice for anyone who is looking for maximum performance and safety.

WTB's proprietary 4D spoke drilling prevents binding and lateral loading of the spokes, while the spoke bed itself has been updated to provide a more compatible interface between the spoke and rim. Integration of the all-new Solid Strip on our TCS 2.0 rims delivers the easiest to mount and most reliable tubeless system we’ve ever made. Features: - TCS 2.0 creates a more robust, easily installed and dependable tubeless system. - A recessed channel along the center of TCS 2.0 rims allows installation of the all-new Solid Strip, which prevents tubeless tape from sagging at the spoke holes and results in a smooth, consistent interface between the tire and rim. - 4D angled spoke drilling eliminates binding and lateral loading, and disperses tension more evenly over a greater area

Rims: Mavic XM119 Disc 26" (Black) - ETRTO 559-19 - External width: 24mm - Inner width: 19mm - Profile height: 20.5mm - Disc Brake Only - For Schrader or Presta valve (Adapter included) - 32 holes Front hub: Shimano HB-M475 (Black) - 9x100mm - 6-Bolt Disc Mount - Adjutable Cup & Cone - Contact sealed hub - Quick Release Binder included Rear hub: Shimano FH-M475 (Black) - 10x135mm - 6-Bolt Disc Mount - Adjutable Cup & Cone - Contact sealed hub and freehub body - Quick Release Binder included - Compatible with 8,9,10 speed (MTB 11 speed requires 1.85mm spacer, not included) - Assembled in North America by experienced wheelbuilders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

Rims: WTB HTZ i30 29" - ETRTO 622-30 - Inner width: 30mm - 6061 series aluminum - Asymetric and angled spoke hole drilling distributes spoke tension more evenly - Reinforced I-Beam profile - Strong sleeved joint - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip included - Tubeless valve included - 32 holes Rear hub: Shimano FH-MT410-B (Boost, MS) - Center Lock (6-Bolt adapter included) - Quick Engagement Freehub, 36 Points of Contact, 10 deg. engagement - HG compatible Shimano 11spd and Sram NX / SX splined 12spd (10spd and below needs spacer) - MS compatible 12 Spd Shimano Micro Spline only Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), 14mm Brass Polyax Nipples (Black)

Overkill? Maybe. Let’s just call it a rim you can ride over hill and dale without bothering to pack a spoke wrench. Product specs: - Sizes: 700c, 29-inch, 20-inch, 20x1 3/8-inch, 24-inch, 24x1-3/8-inch - Hole counts: 32, 36 - Width: 22.5mm

Replacement Freehub body for I9 Hydra, I9 1/1, and Crankbrothers Hubs - Shimano HG/Synthesis Base Steel Driver

Ease of use, lightweight, and optimum performance in a single product. The DT Pro Head shape, combined with both a torx and a square tool interface, makes wheel building a lot easier. The spherical contact surface aligns the nipple perfectly with the spoke. All-brass nipples are recommended for e-bike use. Weight: starting at 26g for 64 nipples.

- Original equipment freehub bodies to fit SRAM hubs and wheels. - Includes Drive Side Axle End Cap

• Replacement aluminum quick release skewers

Sta Tru Front Wheel - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 700c - ISO Diameter: 622 / road / 29" - Front Axle: QR x 100mm - Tire Type: Clincher

Sta-Tru Double Wall Rear Wheels. - Wheel Size: 20-inch - ISO Diameter: 406 / 20-inch BMX - Valve: Schrader - Tire Type: Clincher

Thru Axle for HELM suspension forks. - Compatible only with Cane Creek HELM forks

Spank's Spoon 32 rims are gravity rims done right! If your rides encompass big hits and fast descents then a pair of Spoon 32 rims might be just what you need to tackle your favored terrain. - Six Series aluminum alloy - Disc specific rim - Tubeless Ready